Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

Difference between revisions of "Sunroof Reset"

From www.FordWiki.co.uk
Jump to: navigation, search
m (de-Forded.)
m
Line 1: Line 1:
 
After disconnecting the battery or removing the power plug from the sunroof on the Mk3, you will need to reset the sunroof motor as follows:
 
After disconnecting the battery or removing the power plug from the sunroof on the Mk3, you will need to reset the sunroof motor as follows:
  
* Operate the sunroof switch to the up/close position until the sunroof is in the fully open/vent position.
+
# Operate the sunroof switch to the up/close position until the sunroof is in the fully open/vent position.
  
* Release the switch.
+
# Release the switch.
  
* Operate the switch to the up/close position and hold for 30 seconds until there is a small movement (approximately 2 mm) and the sunroof motor stops.
+
# Operate the switch to the up/close position and hold for 30 seconds until there is a small movement (approximately 2 mm) and the sunroof motor stops.
  
* Release the switch.
+
# Release the switch.
  
* Operate the switch to the up/close position again within 0.5 seconds until the sunroof stops (one complete cycle).
+
# Operate the switch to the up/close position again within 0.5 seconds until the sunroof stops (one complete cycle).
  
 
[[Category:Mk3]]
 
[[Category:Mk3]]
 
[[Category:Electrical]]
 
[[Category:Electrical]]

Revision as of 05:11, 2 October 2008

After disconnecting the battery or removing the power plug from the sunroof on the Mk3, you will need to reset the sunroof motor as follows:

  1. Operate the sunroof switch to the up/close position until the sunroof is in the fully open/vent position.
  1. Release the switch.
  1. Operate the switch to the up/close position and hold for 30 seconds until there is a small movement (approximately 2 mm) and the sunroof motor stops.
  1. Release the switch.
  1. Operate the switch to the up/close position again within 0.5 seconds until the sunroof stops (one complete cycle).