Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "MTX-75 Oil Change"
Siacelestar (Talk | contribs) |
Siacelestar (Talk | contribs) |
||
| Line 1: | Line 1: | ||
== Changing MTX-75 Transmission Oil == | == Changing MTX-75 Transmission Oil == | ||
| − | Required Toolings: 8mm Allen Key | + | === Required Toolings: === |
| + | 8mm Allen Key | ||
| + | |||
| + | === Introduction === | ||
| + | The MTX-75 is intended to be a sealed for life unit which doesn't require any transmission oil change. However if you are going to change the oil for any reason, here is the way to do it. | ||
| + | |||
| + | The oil spec for the gearbox is a bit confusing. For Mk1 the spec is ESD-M2C-186-A, on Mk2 and Mk3 the spec is WSD-M2C200-C. | ||
| + | |||
| + | Despite the difference in the spec, the US Ford has issued a service bulletin about the new specification oil available and the recommendation to use it. Here's the address: | ||
| + | |||
| + | http://www.contour.org/FAQ/docs/New_Transaxle_Fluid_Service.pdf | ||
| + | |||
| + | I have personally switched and all i can say is that the shifting is miles more positive, although the half worn synchromesh was more obvious now coz of the slicker shifting. | ||
| + | |||
| + | === Fluid Capacity: === | ||
| + | Mk1 - 2.6 litres | ||
| + | Mk2 - Pre 1999 2.7 litres | ||
| + | Mk2 - 1999 onwards - 1.9 litres | ||
| + | Mk3 - 1.9 litres | ||
| + | |||
| + | |||
[[Category:Reference]] | [[Category:Reference]] | ||
Revision as of 18:31, 27 May 2007
Contents
Changing MTX-75 Transmission Oil
Required Toolings:
8mm Allen Key
Introduction
The MTX-75 is intended to be a sealed for life unit which doesn't require any transmission oil change. However if you are going to change the oil for any reason, here is the way to do it.
The oil spec for the gearbox is a bit confusing. For Mk1 the spec is ESD-M2C-186-A, on Mk2 and Mk3 the spec is WSD-M2C200-C.
Despite the difference in the spec, the US Ford has issued a service bulletin about the new specification oil available and the recommendation to use it. Here's the address:
http://www.contour.org/FAQ/docs/New_Transaxle_Fluid_Service.pdf
I have personally switched and all i can say is that the shifting is miles more positive, although the half worn synchromesh was more obvious now coz of the slicker shifting.
Fluid Capacity:
Mk1 - 2.6 litres Mk2 - Pre 1999 2.7 litres Mk2 - 1999 onwards - 1.9 litres Mk3 - 1.9 litres
Your Privacy Choices