Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

Daytime Running Lights

From www.FordWiki.co.uk
Revision as of 18:26, 18 August 2008 by Compuwiz uk (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Mk3 Daytime Running lights

= Background

This Mod basically turns on the Sidelights/Dipped Beam headlights as soon as the ignition is in the accessory position or the engine is running even with the headlight switch set to the OFF position.

This mod is switched off as soon as you turn the headlight switch to any other setting than the OFF position.


Parts

Required

Single Pole Single Throw Relay Wire ( The amount required will change depending on where you mount the relay ) Crimp Connections ( types & amounts change depending on how you wire it  :whistling: )

These make life easier for fitting

Scrapyard Headlight Switch Plug ( for the connection plugs from it )


Method

Wire up the relay as shown in the following diagram ( using suitable connectors from the headlight switch plug for pins 4 & 15 of the headlight switch one of these connectors can also be used on C501 too )

Daytime Running Lights.jpg

Connection to C500 in the diagram is via your preferred method of joining wires.

the connection C500 & C501 you need is shown in the following image

Glovebox relays.jpg


Once those connections are made & the relay is in place then that should be it complete.


Odd Quirk's You Need To Be Aware Off

If you have the drivers door open when you turn the ignition on then you will get a single chirp from the Lights Left ON warning system before it realises whats happening & switch's off, with the door shut this problem does not happen.


Submitted by Compuwiz_uk