Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
ARB Bush Replacement
UNDER CONSTRUCTION:
http://www.talkford.com/topic/138367-does-someone-want-to-make-this-a-wiki/
Now moving to the ARB bushes use the ½ drive ratchet with a 13mm socket to remove the single bolt and then a large screwdriver to prise the bracket of (this is a bit of a fiddle)
Resized to 59% (was 1023 x 682) - Click image to enlargePosted Image
http://i152.photobuc...10/_MG_3600.jpg
Next just swap the bushes (WD40 should not be used as a lubricant as it can be corrosive to rubber) and put everything back as you found it and job should be done! I Hope this was of some help.
Your Privacy Choices