Difference between revisions of "Rear Entertainment System Retro Fit"

Revision as of 11:53, 20 January 2009

Pin Connection at the back of the Unit

1 blue/red Can Bus + to Pin

2 blue/black Can Bus - to Pin

3 Black/red Ground (pick up any where)

4 Gray/white (Left -) to Pin 7c

5 White/Voilet (left +) to Pin 1c

6 gray/red Ilumination to Pin

7

8 Orange/green +12v (pick up any where)

9 Gray (Right - ) to pin 8c

10 White (Right +) to pin 2c

Pin Connection at the back of the Radio Unit

Assuming the speaker positives are 1-4 and negatives 5-8, continuing along to the power section;

9. CAN+ 13. Alarm Sense

10. CAN- 14. Illumination

11. Key Ground 15. BATTERY 12v

12. SYSTEM GROUND 16. IGNITION (Acc)

The two accessory blocks are independently numbered 1-12 left to right;

BLACK BLOCK - Below speaker section Block B

1. Mono + 7. Mono -

2. SW A + 8. SWC Ground

3. AUX L + 9. AUX L -

4. Aux R + 10. Aux R -

5. PTA (mute) 11. Reverse Sense

6. SWC 12. Not used

WHITE BLOCK - Below fuse section Block C

1. RSE L + 7. RSE L -

2. RSE R + 8. RSE R -

3. Mono 2 + 9. Mono 2 -

4. Not Used 10. Not used

5. Aux 2 Left 11. Aux 2 Right

6. Audio Ground 12. Not used

Submitted by Col_Tubbs