Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Puddle Lights Front *aftermarket* - fitting and wiring
Fitting and wiring of front "under door" puddle lights to the Mk3 mondeo
Equipment needed :
Philips screwdriver
T25 torx driver
Small flathead screwdriver
Stanley knife
Several meters of wire (Black for neg and another colour for posi)
Scotch Locks or Soldering iron
self adhesive LED strip lighting (your own desired length)
Heatshrink tubing or electrical tape
Getting started
You'll need to remove the front door cards. This is done by undoing the 6 screws around the edge of the door card. Theres a T25 torx in the interior door handle recess behind a plastic cap, (this cap is easily removed with a small blob of blu tack on the end of your finger), and a screw in the wing mirror cover which will also need to be removed along with 2 philips screws inside the door pull which are accessible by removing the inside of the door pull by prising it with a small flathead screwdriver. With the door mirror cover out of the way the door card should lift up and off with ease.