Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "Powerfold Mirrors With Puddle Lights Retro-fit"
From www.FordWiki.co.uk
Compuwiz uk (Talk | contribs) (→Puddle Light Wiring) |
Compuwiz uk (Talk | contribs) |
||
| (13 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | == Required | + | {{note|'''The Ford Mondeo hit our roads in 1993, and has consistently been a sales success. Now on its 4th incarnation, it remains a drivers favourite.'''<br> |
| + | '''For more information, visit the [http://www.talkford.com/forum/596-mondeo/ Ford Mondeo] forum on [http://www.talkford.com TalkFord.com], the definitive resource site covering all Fords from the present day to the 1970's.'''}} | ||
| + | ---- | ||
| + | {{Infobox | ||
| + | |name = Infobox Template | ||
| + | |bodystyle = float:right; valign:top; | ||
| + | |image = [[File:Fordwiki infobox.png]] | ||
| + | |imagestyle = | ||
| + | |caption = Overview Guide | ||
| + | |captionstyle = | ||
| + | |headerstyle = background:#ccf; | ||
| + | |labelstyle = background:#ddf; | ||
| + | |datastyle = text-align:right; | ||
| + | |header1 = | ||
| + | |label1 = Ford Model: | ||
| + | |data1 = '''Mondeo''' | ||
| + | |header2 = | ||
| + | |label2 = Petrol/Diesel: | ||
| + | |data2 = '''Both''' | ||
| + | |header3 = | ||
| + | |label3 = Estimated Cost: | ||
| + | |data3 = '''£100''' | ||
| + | |header4 = | ||
| + | |label4 = Difficulty? | ||
| + | |data4 = '''Easy+''' | ||
| + | |label5 = How long does this take? | ||
| + | |data5 = '''2-3 Hours''' | ||
| + | }} | ||
| + | |||
| + | == Required parts == | ||
=== Facelift === | === Facelift === | ||
| − | Mirrors with | + | * Mirrors with powerfold & puddle lights. |
| − | + | * Powerfold relay. | |
| − | Powerfold | + | * Adjustment switch with powerfold position. |
| − | + | ||
| − | Adjustment | + | |
| − | + | ||
=== Pre-facelift === | === Pre-facelift === | ||
| − | + | As above plus: | |
| + | * Both front door wiring looms from a facelift mondeo. | ||
| + | * Interior front door plug from a scrapped mondeo as 4 pins from inside the door plug are needed for wiring the puddle lights. | ||
| − | + | Check below the glovebox fusebox for the brown relay holder. If no brown relay holder is in place then you will need the following too: | |
| − | + | * Brown relay holder with wires. | |
| − | + | * Fusebox plug & wiring. | |
| − | + | * An additional 5 wires & connectors for the door plug. | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | Brown | + | |
| − | + | ||
| − | Fusebox | + | |
| − | + | ||
| − | An | + | |
== Fitting == | == Fitting == | ||
| Line 32: | Line 51: | ||
=== Facelift === | === Facelift === | ||
| − | + | # [[Removal Of Door Cards - Mk3|Remove door card]] | |
| − | + | # Remove old mirror switch from wiring & plastic surround | |
| − | Remove | + | # Refit new switch to plastic cover & plug into the door loom |
| − | + | # Unplug mirror wiring | |
| − | Refit | + | # Remove 3 Torx screws for the mirror (remember to support the mirror on the outside when removing the last screw or risk seven years' bad luck) |
| − | + | # Fit new mirror unit | |
| − | Unplug | + | # Refit door card |
| − | + | # Repeat for the other door | |
| − | Remove 3 Torx | + | # Remove glovebox |
| − | + | # Insert the relay | |
| − | + | # Refit the glovebox | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | Fit | + | |
| − | + | ||
| − | Refit | + | |
| − | + | ||
| − | Repeat | + | |
| − | + | ||
| − | Remove | + | |
| − | + | ||
| − | Insert | + | |
| − | + | ||
| − | Refit | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| + | === Pre-facelift === | ||
| − | |||
| − | + | # [[Removal Of Door Cards - Mk3|Remove door card]] | |
| + | # Partially remove the foam weather seal | ||
| + | # Uncouple door loom from car seperating it from the door by turning it. | ||
| + | # Uncouple the plugs to the door lock mechanism & window motor. | ||
| + | # Remove wiring from the door, the rubber seals just pull/push through. Remembering its layout to aid refitting. | ||
| + | # Refit facelift door loom into the door | ||
| + | # Plug window motor & door lock unit back in | ||
| + | # Refit (re-seal if required) the inner weather seal | ||
| + | # Remove old mirror switch from wiring & plastic surround | ||
| + | # Fit new switch to plastic cover & plug into the door loom | ||
| + | # Unplug mirror wiring | ||
| + | # Remove 3 Torx screws for the mirror (remember to support the mirror on the outside when removing the last screw or risk seven years' bad luck) | ||
| + | # Fit new mirror unit and plug in the connector. | ||
| + | # Refit door card | ||
| + | # Repeat for the other door | ||
| + | # Remove glovebox | ||
| + | # Insert the relay | ||
| + | # Refit the glovebox | ||
| + | # Add puddle light wiring to the interior of the door plug in the pin locations found below. | ||
| − | + | If you need to wire in the powerfold relay holder then you will need the following info: | |
| − | + | ==== Connector locations ==== | |
| − | === | + | C54 = drivers side upper top door plug.<br> |
| + | C52 = passenger side door plug.<br> | ||
| + | C506 = on the rear of the fusebox, top plug nearest the door on the back. | ||
| − | + | ==== Powerfold relay holder ==== | |
| − | Pin | + | * Pin 1 - C54 pin 6 & C52 pin 10 (powerfold) |
| + | * Pin 2 - C54 pin 10 (switch) | ||
| + | * Pin 3 - C54 pin 7 & C52 pin 1 (powerfold) | ||
| + | * Pin 4 - C506 pin 12 (power feed) | ||
| + | * Pin 5 - ground | ||
| − | + | ==== Puddle light wiring ==== | |
| − | + | Feeds taken from the front footwell lights are easiest, to: | |
| + | * Driver's side = C54 pin 12 & pin 13 | ||
| + | * Passenger side = C52 pin 6 & pin 7 | ||
| − | |||
| − | == | + | == Wiring Diagrams == |
| − | + | === Powerfold Wiring === | |
| − | + | [[File:Powerfold.jpg]] | |
| − | |||
| + | === Powerfold Switch === | ||
| + | [[File:Powerfold_switch.jpg]] | ||
| + | === Puddle Light Wiring === | ||
| − | + | [[File:Puddle_lights.jpg]] | |
| − | [[Category: | + | [[Category:Mondeo_Mk3]] |
| − | + | ||
| − | + | ||
Latest revision as of 12:22, 13 April 2013
The Ford Mondeo hit our roads in 1993, and has consistently been a sales success. Now on its 4th incarnation, it remains a drivers favourite.
For more information, visit the Ford Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.
For more information, visit the Ford Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.
 Overview Guide | |
| Ford Model: | Mondeo |
|---|---|
| Petrol/Diesel: | Both |
| Estimated Cost: | £100 |
| Difficulty? | Easy+ |
| How long does this take? | 2-3 Hours |
Contents
Required parts
Facelift
- Mirrors with powerfold & puddle lights.
- Powerfold relay.
- Adjustment switch with powerfold position.
Pre-facelift
As above plus:
- Both front door wiring looms from a facelift mondeo.
- Interior front door plug from a scrapped mondeo as 4 pins from inside the door plug are needed for wiring the puddle lights.
Check below the glovebox fusebox for the brown relay holder. If no brown relay holder is in place then you will need the following too:
- Brown relay holder with wires.
- Fusebox plug & wiring.
- An additional 5 wires & connectors for the door plug.
Fitting
Facelift
- Remove door card
- Remove old mirror switch from wiring & plastic surround
- Refit new switch to plastic cover & plug into the door loom
- Unplug mirror wiring
- Remove 3 Torx screws for the mirror (remember to support the mirror on the outside when removing the last screw or risk seven years' bad luck)
- Fit new mirror unit
- Refit door card
- Repeat for the other door
- Remove glovebox
- Insert the relay
- Refit the glovebox
Pre-facelift
- Remove door card
- Partially remove the foam weather seal
- Uncouple door loom from car seperating it from the door by turning it.
- Uncouple the plugs to the door lock mechanism & window motor.
- Remove wiring from the door, the rubber seals just pull/push through. Remembering its layout to aid refitting.
- Refit facelift door loom into the door
- Plug window motor & door lock unit back in
- Refit (re-seal if required) the inner weather seal
- Remove old mirror switch from wiring & plastic surround
- Fit new switch to plastic cover & plug into the door loom
- Unplug mirror wiring
- Remove 3 Torx screws for the mirror (remember to support the mirror on the outside when removing the last screw or risk seven years' bad luck)
- Fit new mirror unit and plug in the connector.
- Refit door card
- Repeat for the other door
- Remove glovebox
- Insert the relay
- Refit the glovebox
- Add puddle light wiring to the interior of the door plug in the pin locations found below.
If you need to wire in the powerfold relay holder then you will need the following info:
Connector locations
C54 = drivers side upper top door plug.
C52 = passenger side door plug.
C506 = on the rear of the fusebox, top plug nearest the door on the back.
Powerfold relay holder
- Pin 1 - C54 pin 6 & C52 pin 10 (powerfold)
- Pin 2 - C54 pin 10 (switch)
- Pin 3 - C54 pin 7 & C52 pin 1 (powerfold)
- Pin 4 - C506 pin 12 (power feed)
- Pin 5 - ground
Puddle light wiring
Feeds taken from the front footwell lights are easiest, to:
- Driver's side = C54 pin 12 & pin 13
- Passenger side = C52 pin 6 & pin 7
Wiring Diagrams
Powerfold Wiring
Powerfold Switch
Puddle Light Wiring
Your Privacy Choices