Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "Handbrake Warning Light"
(→Method) |
|||
| Line 41: | Line 41: | ||
== Method == | == Method == | ||
| − | The switch itself is activated by the handbrake lever pushing or releasing a plunger which makes or breaks an electrical contact | + | The switch itself is activated by the handbrake lever pushing or releasing a plunger which makes or breaks an electrical contact. The circuit is completed by switching to ground. |
| − | Remove the coin holder from the | + | Remove the coin holder from the centre console near the handbrake lever. |
| − | Using a tin of compressed air and a nozzle (usually available from a photographic store such as Jessops), you should be able to blast any dirt off the switch by placing the nozzle in the hole where the coin holder was | + | Using a tin of compressed air and a nozzle (usually available from a photographic store such as Jessops), you should be able to blast any dirt off the switch by placing the nozzle in the hole where the coin holder was. |
| − | Switch the engine on and with the | + | Switch the engine on and with the foot-brake applied, engage and disengage the handbrake a few times |
| − | If the light still refuses to come on, you may need to use some | + | If the light still refuses to come on, you may need to use some switch cleaning spray. This is preferable to WD40, which leaves a residue and should not really be used on electrical contacts. Make sure you open the car windows though - the spray is not particularly pleasant if you inhale it! |
[[Category:Mondeo_Mk1]] | [[Category:Mondeo_Mk1]] | ||
[[Category:Mondeo_Mk2]] | [[Category:Mondeo_Mk2]] | ||
Revision as of 05:05, 24 May 2011
For more information, visit the Ford Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.
 Overview Guide | |
| Ford Model: | Mondeo |
|---|---|
| Petrol/Diesel: | ??? |
| Estimated Cost: | ??? |
| Difficulty? | ??? |
| How long does this take? | ??? |
Handbrake Warning Light - Mk1/Mk2
Background
If the Handbrake Warning Light fails to illuminate when the handbrake is engaged, it is going to be one of two things...
Either the bulb in the dash has died, or There is some dirt in the handbrake switch itself on the electrical contacts.
In the case of bulb in the dash having died, you will have to remove the clock surround and access the bulbs.
If, however, the switch has failed, it should be easy enough to fix, although you may need some compressed air or silicone switch cleaner spray.
Method
The switch itself is activated by the handbrake lever pushing or releasing a plunger which makes or breaks an electrical contact. The circuit is completed by switching to ground. Remove the coin holder from the centre console near the handbrake lever. Using a tin of compressed air and a nozzle (usually available from a photographic store such as Jessops), you should be able to blast any dirt off the switch by placing the nozzle in the hole where the coin holder was. Switch the engine on and with the foot-brake applied, engage and disengage the handbrake a few times If the light still refuses to come on, you may need to use some switch cleaning spray. This is preferable to WD40, which leaves a residue and should not really be used on electrical contacts. Make sure you open the car windows though - the spray is not particularly pleasant if you inhale it!
Your Privacy Choices