Fog Light Removal

Submitted by STdriveRS.co.uk

---

ST220

1) Remove the two screws in the black surround (they may be corroded so might be a pain to get out).

2) Grab then center bit that looks like a fin, closest to the radiator side and give it a good tug and it should pop out.

3) The remainder of the fittings are behind there (requires clarification)

When you "pull" the foglight surround, you actually need to "unclip" it from the inner section of the bumper where it's located after removing both screws.

You then need to pull the surround out but keep the outer edge in place as there are 2 more locating lugs that are hidden behind this, bending the surround too much will snap them off and you will need to source a new one.

The foglight itself is held in with 2 bolts that are simply unscrewed from their captive nuts behind the bumper itself.

Remember that if you are removing the foglight by way of unplugging it from the car, you will need to reattach the wiring to the foglight before inserting and refitting it, otherwise you will have to remove the undertray to get to the wiring plug, much easier to do it the right way first :)