Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "F Super"
Peter scott (Talk | contribs) m |
Peter scott (Talk | contribs) m (VIN decode changed) |
||
| Line 12: | Line 12: | ||
To determine your car's build date check the boxes 11 and 12 on your VIN label. | To determine your car's build date check the boxes 11 and 12 on your VIN label. | ||
| − | [[File:Build_Date.jpg]] | + | [[File:Build_Date 2.jpg]] |
Revision as of 19:08, 21 February 2012
The F-Super / Formidable Instruction Manual
File:F Super Formidable Manual.pdf
A frequently asked question is "Can F-Super re-code my injectors?"
The answer depends on the build date of your car.
Cars with build date 06/2003 and later (i.e. 3Y) can have their injector codes written to and read from the PCM by F-Super but earlier cars cannot.
To determine your car's build date check the boxes 11 and 12 on your VIN label.
MAP, BARO and Boost Pressure
F Super is very good but the Live Data screen has some problems with the stated units:
MAP has units of kPA but the actual values shown in the F Super window need to be multiplied by 10 to be correct. (e.g. At rest the MAP should just read atmospheric pressure which is about 100 kPa but F Super reads 10 kPa)
Likewise the BARO reading in F Super should normally read about 1000 mb (millibars) but actually displays about 100 mb.
So, if you wanted to know what your Boost Pressure was:
Boost pressure in psi = ((10xMAP) - BARO) / 6.895
e.g. If the MAP is reading 23 in F Super and BARO is reading 100 we can say that the boost pressure is:
230 - 100 = 130 kPa. i.e. 18.85 psi
1 bar = 100 kPa.
1 psi = 6.895 kPa.
Accelerator Pedal Position Sensors APP1, APP2, APP3
Your Privacy Choices