Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

Difference between revisions of "Door Handle Fix"

From www.FordWiki.co.uk
Jump to: navigation, search
Line 55: Line 55:
  
 
[[File:Ka_door_handle_fix_10.jpg‎]]
 
[[File:Ka_door_handle_fix_10.jpg‎]]
 +
 +
 +
'''Step 2 : Remove security panel'''
 +
 +
Both rivets need drilled out, I used a 4.5mm drill bit. Then the silicone seal needs separated from the panel with a stanley knife.
 +
 +
[[File:Ka_door_handle_fix_11.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_12.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_13.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_14.jpg‎]]
 +
 +
 +
'''Step 3 : Fit new handle and reconnect to lock mechanism'''
 +
 +
Unscrew old handle (you can see the linkage that is broken on the old handle). Attach linkage and screw in new handle.
 +
 +
[[File:Ka_door_handle_fix_15.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_16.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_17.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_18.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_19.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_20.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_21.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_22.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_23.jpg‎]]
 +
 +
 +
'''Step 4 : Re-rivet and seal security panel and reattach door card'''
 +
 +
Re-rivet security panel to door using 4mm rivet (An alternative would be to attach using self tapping screws). Then reseal (this step could be skipped if necessary, but probably best to do it) using silicone sealant. Then reattach door card using the clips and 4 screws. Reconnect electric window controls and pop back in.
 +
 +
[[File:Ka_door_handle_fix_24.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_25.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_26.jpg‎]]
 +
 +
[[File:Ka_door_handle_fix_27.jpg‎]]
 +
  
  
 
[[category:Ka_Mk1]]
 
[[category:Ka_Mk1]]

Revision as of 12:48, 27 November 2011

Ford Ka - Fixing a broken outside door handle (handle will not open door)


Basically the plastic handle is attached to the lock mechanism via a metal rod, the plastic linkage on the back of the door handle gets broken and can no longer open the door. I was quoted £120 to fix this at the dealers, so thought I would have a go myself. Some people had written guides about removing the door trim, but nobody had actually done a guide about fixing the door handle problem start to finish.


Tools Required


Screwdriver (philips star and flat heads)

Drill (4 / 4.5 mm metalwork drill bit)

Stanley Knife

2x 4mm rivets and a rivet gun (or self tapping screws)

silicone sealant (optional)


Step 1 : Remove door card and skin


Pop out electric window control with a flat screwdriver and disconnect from cable. Removed screw now visible in the hole.

Ka door handle fix 1.jpg


Remove the other 3 screws from the door card..

Ka door handle fix 2.jpg

Ka door handle fix 3.jpg

Ka door handle fix 4.jpg


Door card can now be removed, its held on with plastic clips that should pop off..

Ka door handle fix 5.jpg

Ka door handle fix 6.jpg


Now peel back the skin behind the handle area..

Ka door handle fix 7.jpg


You should now be able to see the severity panel that protects the lock area, its riveted to the door in two places (see third pic top and bottom) and sealed with silicone (black in picture) at the side next to the door skin.

Ka door handle fix 8.jpg

Ka door handle fix 9.jpg

Ka door handle fix 10.jpg


Step 2 : Remove security panel

Both rivets need drilled out, I used a 4.5mm drill bit. Then the silicone seal needs separated from the panel with a stanley knife.

Ka door handle fix 11.jpg

Ka door handle fix 12.jpg

Ka door handle fix 13.jpg

Ka door handle fix 14.jpg


Step 3 : Fit new handle and reconnect to lock mechanism

Unscrew old handle (you can see the linkage that is broken on the old handle). Attach linkage and screw in new handle.

Ka door handle fix 15.jpg

Ka door handle fix 16.jpg

Ka door handle fix 17.jpg

Ka door handle fix 18.jpg

Ka door handle fix 19.jpg

Ka door handle fix 20.jpg

Ka door handle fix 21.jpg

Ka door handle fix 22.jpg

Ka door handle fix 23.jpg


Step 4 : Re-rivet and seal security panel and reattach door card

Re-rivet security panel to door using 4mm rivet (An alternative would be to attach using self tapping screws). Then reseal (this step could be skipped if necessary, but probably best to do it) using silicone sealant. Then reattach door card using the clips and 4 screws. Reconnect electric window controls and pop back in.

Ka door handle fix 24.jpg

Ka door handle fix 25.jpg

Ka door handle fix 26.jpg

Ka door handle fix 27.jpg