Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "Door Cards - Removal"
From www.FordWiki.co.uk
52graphite (Talk | contribs) m (→Method) |
52graphite (Talk | contribs) m (→Method) |
||
| Line 5: | Line 5: | ||
# Remove screw covers on mirror cover (fronts) and door handle recess using a sharp point (knife?). Be very careful not to lose them when they fly out! | # Remove screw covers on mirror cover (fronts) and door handle recess using a sharp point (knife?). Be very careful not to lose them when they fly out! | ||
# (Fronts only) Remove philips screw from mirror cover, and remove mirror cover. It's held in with a spring clip at the top: just pull | # (Fronts only) Remove philips screw from mirror cover, and remove mirror cover. It's held in with a spring clip at the top: just pull | ||
| − | # The door pull (the bit you put your fingers in to pull the door shut) is lined with a plastic L-shaped piece (bottom and "fingers-side") which needs to come out. Using a flat blade screwdriver or similar tool in the gap between the top edge of the plastic part and the door trim, carefully but firmly push it | + | # The door pull (the bit you put your fingers in to pull the door shut) is lined with a plastic L-shaped piece (bottom and "fingers-side") which needs to come out. Using a flat blade screwdriver or similar tool in the gap between the top edge of the plastic part and the door trim, carefully but firmly push it away from you to unclip it, then lift it out. |
# Remove Torx screw (T25) from door handle recess exposed in the previous step. | # Remove Torx screw (T25) from door handle recess exposed in the previous step. | ||
# Remove philips screws fron door pull recess: 2 in front doors, 1 in rears. | # Remove philips screws fron door pull recess: 2 in front doors, 1 in rears. | ||
Revision as of 03:47, 7 October 2008
How to Remove the Door Cards From A Mk3
Method
- Remove screw covers on mirror cover (fronts) and door handle recess using a sharp point (knife?). Be very careful not to lose them when they fly out!
- (Fronts only) Remove philips screw from mirror cover, and remove mirror cover. It's held in with a spring clip at the top: just pull
- The door pull (the bit you put your fingers in to pull the door shut) is lined with a plastic L-shaped piece (bottom and "fingers-side") which needs to come out. Using a flat blade screwdriver or similar tool in the gap between the top edge of the plastic part and the door trim, carefully but firmly push it away from you to unclip it, then lift it out.
- Remove Torx screw (T25) from door handle recess exposed in the previous step.
- Remove philips screws fron door pull recess: 2 in front doors, 1 in rears.
- Remove philips screws from around the door: 6 on front doors and 4 on rears.
- Remove the door card by lifting up and out. You'll need to remove the connector from the window switches - there's a locking tag to manipulate to get them to release.
Window switches are clipped in from behind, when you replace them make sure you get all clips to catch, as it is annoying to have to remove the door panel again when you haven't got one of them in and the switch starts dipping at the unsecured end. Also, don't forget to reconnect the electrical connector before replacing the door card.
Your Privacy Choices