Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "Center Console Removal"
(New page: Mk3 Center Console Removal Start by undoing the footwell screws, 1 each side and then pull of these 2 panels. There's a series of clips at the gear shift end of the panels - just give the...) |
52graphite (Talk | contribs) m |
||
| Line 1: | Line 1: | ||
| − | Mk3 | + | Mk3 Centre Console Removal |
| − | Start by undoing the footwell screws | + | Start by undoing the footwell side panel screws - one each side. Pull off these two panels: there are series of clips holding them on - just give them a good tug. |
| + | Then unscrew the screws that secure the console to the instrument panel bracket, one each side. These are just behind the panels you have removed, by the front of the gear shift end of the console. | ||
| − | + | Remove the screws that secure the gear shift bezel to the console, two each side. Pop out the cupholder (may be screwed in!) and boot release switch and remove the two screws, then pull off the gear shift bezel assembly rear end first (no need to remove the gaiter). | |
| − | + | ||
| − | + | ||
| − | Remove the screws that secure the gear shift bezel to the console, | + | |
| − | + | ||
Pop out the ashtray/cupholder and check if there's a screw underneath, if so, unscrew it. | Pop out the ashtray/cupholder and check if there's a screw underneath, if so, unscrew it. | ||
| − | |||
Remove the 2 screws in the bottom of the rear stowage box (under the armrest). | Remove the 2 screws in the bottom of the rear stowage box (under the armrest). | ||
| − | |||
The console should now be free to remove. | The console should now be free to remove. | ||
Revision as of 06:21, 2 October 2008
Mk3 Centre Console Removal
Start by undoing the footwell side panel screws - one each side. Pull off these two panels: there are series of clips holding them on - just give them a good tug.
Then unscrew the screws that secure the console to the instrument panel bracket, one each side. These are just behind the panels you have removed, by the front of the gear shift end of the console.
Remove the screws that secure the gear shift bezel to the console, two each side. Pop out the cupholder (may be screwed in!) and boot release switch and remove the two screws, then pull off the gear shift bezel assembly rear end first (no need to remove the gaiter).
Pop out the ashtray/cupholder and check if there's a screw underneath, if so, unscrew it.
Remove the 2 screws in the bottom of the rear stowage box (under the armrest).
The console should now be free to remove.
Your Privacy Choices