Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Difference between revisions of "Center Console Removal"
(New page: Mk3 Center Console Removal Start by undoing the footwell screws, 1 each side and then pull of these 2 panels. There's a series of clips at the gear shift end of the panels - just give the...) |
(No difference)
|
Revision as of 19:48, 6 March 2007
Mk3 Center Console Removal
Start by undoing the footwell screws, 1 each side and then pull of these 2 panels. There's a series of clips at the gear shift end of the panels - just give them a good tug.
Then unscrew the screws that secure the console to the instrument panel bracket, 1 each side. These are just behind the 2 panels you have removed, by the front of the gear shift end of the console.
Remove the screws that secure the gear shift bezel to the console, 2 each side iirc. Pop out the cupholder and boot release switch and remove the 2 screws, then pull of the gear shift bezel assembly rear end first (no need to remove the gaiter).
Pop out the ashtray/cupholder and check if there's a screw underneath, if so, unscrew it.
Remove the 2 screws in the bottom of the rear stowage box (under the armrest).
The console should now be free to remove.
Your Privacy Choices