We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: Wiki Submission Forum

Bulkhead - Pulling a live feed through

Revision as of 19:14, 6 March 2007 by (Talk)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Howto Pull a Live Feed Through the Bulkhead on a MkIII? 1) Find the big loom going through the bulkhead on the passenger side.

Loom Location

2) Pull out the glovebox

Glovebox Removed

3) Find the other side of the big loom behind all those fuses

Behind Fuses

4) Poke a screwdrive through the grommet, trying to avoid the wires, I found there was space in the gromet above the main bundle. If you got it right, it should appear under the bonnet.

Poke hole in Grommet

5) I poked a coat hanger through the hole, bent the end over and pulled the new cable back into the car.

Pull Cable Thru

6) Pull all slack though, and route through to the boot, or where ever you need it, and reassemble the glovebox.

Submitted by FasterFords?