Bulkhead - Pulling a live feed through

The Ford Mondeo hit our roads in 1993, and has consistently been a sales success. Now on its 4th incarnation, it remains a drivers favourite.
For more information, visit the Mk3 Mondeo forum on TalkFord.com, the definitive resource site covering all Fords from the present day to the 1970's.

Overview Guide (Demonstration)
Ford Model:	Mondeo
Petrol/Diesel:	Both
Estimated Cost:	None
Difficulty?	Easy, just fiddly
How long does this take?	1/2 hour

Howto Pull a Live Feed Through the Bulkhead on a MkIII?

1) Find the big loom going through the bulkhead on the passenger side.

Loom Location

2) Pull out the glovebox

Glovebox Removed

3) Find the other side of the big loom behind all those fuses

Behind Fuses

4) Poke a screwdrive through the grommet, trying to avoid the wires, I found there was space in the gromet above the main bundle. If you got it right, it should appear under the bonnet.

Poke hole in Grommet

5) I poked a coat hanger through the hole, bent the end over and pulled the new cable back into the car.

Pull Cable Thru

6) Pull all slack though, and route through to the boot, or where ever you need it, and reassemble the glovebox.