Registrations
We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.
If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum
Automatic boot opening Mondeo Mk3
Overview Guide | |
Ford Model: | Mondeo Mk3 |
---|---|
Petrol/Diesel: | Diesel |
Estimated Cost: | £26 |
Difficulty? | Easy |
How long does this take? | 30 min |
Automatic boot opening
First things first you will need a pair of compression spring. I've ordered mine online from www.industrial-springs.com, stock number ST51740. Alternatively you can find them by dimensions :
Abbrev | Description | Value |
---|---|---|
Dh | Min. hole | 19.05 mm |
Dd | Max shaft | 9.52 mm |
L0 | Free length | 114.30 mm |
R | Spring constant | 11.2 N/mm |
S1 | Optimal service life at F1 | 28.58 mm |
L1 | Length at F1 | 85.73 mm |
F1 | Force at S1 | 320.00 N |
Sn | Max travel | 53.72 mm |
Ln | Max loaded length | 60.58 mm |
Fn | Max force | 602.00 N |
Required tools : flat head screw driver, G-clamp, 2xcompression springs, 2 heat shrink tubes (20mm diameter) Step 1: Remove boot gas struts by pulling back the retaining clasp. Careful not to remove it completely, just pull them backwards and slide them towards the end. One gas strut is not powerful enough to sustain the tailgate so careful not to get hurt. Step 2: Once removed the gas strut use a G-clamp to hold it tight. Step 3: Use a tubular shaped tool that would fit the hole in the head of the gas strut ( I've used the handle from a set of Allen keys). Unscrew the head. Step 3: Fit the compression spring and the heat shrink tube.
Step 4: Screw back the head of the gas strut. Step 5: Fit the gas strut on the tailgate and use a lighter to shrink the tube.