Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

F Super

From www.FordWiki.co.uk
Revision as of 09:25, 21 February 2012 by Peter scott (Talk | contribs)

Jump to: navigation, search

A frequently asked question is "Can F-Super re-code my injectors?"

The answer depends on the build date of your car.

Cars with build date 06/2003 and later (i.e. 3Y) can have their injector codes written to and read from the PCM by F-Super but earlier cars cannot.

To determine your car's build date check the boxes 11 and 12 on your VIN label.

Build Date.jpg

The F-Super / Formidable Instruction Manual

File:F Super Formidable Manual.pdf

MAP, BARO and Boost Pressure

F Super is very good but the Live Data screen has some problems with the stated units:

MAP has units of kPA but the actual values shown in the F Super window need to be multiplied by 10 to be correct. (e.g. At rest the MAP should just read atmospheric pressure which is about 100 kPa but F Super reads 10 kPa)

Likewise the BARO reading in F Super should normally read about 1000 mb (millibars) but actually displays about 100 mb.

So, if you wanted to know what your Boost Pressure was:

Boost pressure in psi = ((10xMAP) - BARO) / 6.895

e.g. If the MAP is reading 23 in F Super we can say that the boost pressure is 230 - 100 = 130 kPa. i.e. 18.85 psi

1 bar = 100 kPa.

1 psi = 6.895 kPa.

Accelerator Position Sensors APP1, APP2, APP3

See: http://articles.d-tips.com/art8.html