Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

Difference between revisions of "Instrument Cluster Self-Diagnostic Mode"

From www.FordWiki.co.uk
Jump to: navigation, search
(New page: Instrument Cluster Self-Diagnostic Mode This is for the MK3? Mondeo but will also work on the focus and most other Fords with a digital trip meter. Self-Diagnostic Mode To enter the in...)
 
Line 1: Line 1:
Instrument Cluster Self-Diagnostic Mode
+
== Instrument Cluster Self-Diagnostic Mode ==
This is for the MK3? Mondeo but will also work on the focus and most other Fords with a digital trip meter.
+
  
 +
=== Background ===
 +
This is for the MK3? Mondeo but will also work on the focus and most other Fords with a digital trip meter.
  
Self-Diagnostic Mode
+
== Self-Diagnostic Mode ==
  
 
To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II.  
 
To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II.  
 +
 
When TEST is displayed in the LCD release the tripmeter reset button  
 
When TEST is displayed in the LCD release the tripmeter reset button  
 +
 
The instrument cluster will enter the gauge sweep test.  
 
The instrument cluster will enter the gauge sweep test.  
 +
 
To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests press the tripmeter RESET button.  
 
To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests press the tripmeter RESET button.  
 +
 
The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds.  
 
The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds.  
 +
 
If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster.  
 
If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster.  
  
Note:
+
=== Note ===
Additional tests are available after the following but are not applicable for this diagnostic. Self - Diagnostic Mode
+
  
 +
Additional tests are available after the following but are not applicable for this diagnostic.
 +
 +
=== Self - Diagnostic Mode ===
  
 
Gauge  
 
Gauge  
 +
 
All LCD are illuminated  
 
All LCD are illuminated  
 +
 
Indicator bulbs  
 
Indicator bulbs  
 +
 
ROM level  
 
ROM level  
 +
 
NVM (ROM) level  
 
NVM (ROM) level  
 +
 
EEPROM level  
 
EEPROM level  
DTC. The DTCs? stored will be displayed. The DTC codes will scroll through if there is more than one.  
+
 
 +
DTC. The DTCs? stored will be displayed. The DTC codes will scroll through if there is more  
 +
than one.  
 +
 
 
Road speed m.p.h.  
 
Road speed m.p.h.  
 +
 
Road speed Km/h  
 
Road speed Km/h  
 +
 
Engine speed  
 
Engine speed  
 +
 
Fuel volume Fuel level sensor  
 
Fuel volume Fuel level sensor  
 +
 
ECT/CHT  
 
ECT/CHT  
 +
 
Battery voltage  
 
Battery voltage  
  
 
Submitted by toyo
 
Submitted by toyo
 +
 +
[[Category:Reference]]

Revision as of 13:18, 9 March 2007

Instrument Cluster Self-Diagnostic Mode

Background

This is for the MK3? Mondeo but will also work on the focus and most other Fords with a digital trip meter.

Self-Diagnostic Mode

To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II.

When TEST is displayed in the LCD release the tripmeter reset button

The instrument cluster will enter the gauge sweep test.

To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests press the tripmeter RESET button.

The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds.

If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster.

Note

Additional tests are available after the following but are not applicable for this diagnostic.

Self - Diagnostic Mode

Gauge

All LCD are illuminated

Indicator bulbs

ROM level

NVM (ROM) level

EEPROM level

DTC. The DTCs? stored will be displayed. The DTC codes will scroll through if there is more than one.

Road speed m.p.h.

Road speed Km/h

Engine speed

Fuel volume Fuel level sensor

ECT/CHT

Battery voltage

Submitted by toyo