Registrations

We now manually approve all new user accounts due to a large influx of spam bots. Accounts are normally approved within 48 hours.

If you need any help with using this Wiki, please ask here: TalkFord.com Wiki Submission Forum

Instrument Cluster Self-Diagnostic Mode

From www.FordWiki.co.uk
Revision as of 12:26, 16 December 2008 by 89.19.172.22 (Talk)

Jump to: navigation, search

FIELD_MESSAGE_alc4tpasac

Self-Diagnostic Mode

To enter the instrument cluster Self-Diagnostic Mode simultaneously press and hold the tripmeter reset button and turn the ignition switch to position II.

When TEST is displayed in the LCD release the tripmeter reset button

The instrument cluster will enter the gauge sweep test.

To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests press the tripmeter RESET button.

The self-test is deactivated when the ignition switch is turned to the OFF position or when the tripmeter reset button is pressed and held for 5 seconds.

If Self-Diagnostic Mode cannot be accessed use WDS to diagnose instrument cluster.

Note

Additional tests are available after the following but are not applicable for this diagnostic.

Self - Diagnostic Mode

Gauge

All LCD are illuminated

Indicator bulbs

ROM level

NVM (ROM) level

EEPROM level

DTC. The DTCs stored will be displayed. The DTC codes will scroll through if there is more than one.

Road speed m.p.h.

Road speed Km/h

Engine speed

Fuel volume Fuel level sensor

ECT/CHT

Battery voltage

Submitted by michael@meuer.com

Retrieved from "https://www.fordwiki.co.uk/index.php?title=Instrument_Cluster_Self-Diagnostic_Mode&oldid=2076"